Your® Liner - Ordering platform

Current lead time
/!\ in WEEKdays /!\ Only works if this value is below 50. Contact CGA if we need to put a higher number there.
Current lead time - DualShore
/!\ in WEEKdays /!\ Only works if this value is below 50. Contact CGA if we need to put a higher number there.
Your® Liner can only be ordered by a Certified prosthetic technician. If you are a user and are curious about how Your® Liner could help you in your daily life, please get in touch with your CPO, or take a look at our partner centers:

https://www.motiontech.ch/partner-centers

If the present form seem not to display properly please use the Memo Sheet to collect key info, and come back later to place your order: Your® Liner Memo Sheet
1. Product Line Selection
AMPUTATION TYPE
Amputation level*

Ankle-Ex.TranstibialKnee-Ex.TransfemoralOther
Amputation side*

LeftRight
Auto- Amputation level
Field set automatically and used by suspension workflows
NOTE: For TF stumps with abundant soft tissue, please either:
- Pre-compress the soft tissue with an elastic stocking to obtain homogeneous shape, OR
- Take a plaster cast and send the scan of the positive model (do not apply reductions on the positive model)
LINER BODY TYPE
Which Your® Liner Product Line do you want to work with ?*

UniShoreDualShore

PEAR-SHAPED LIMB ?
Is this residual limb pear-shaped ?*

YesNo

Smallest proximal circumference
Largest distal circumference
=> Largest circumference is bigger than smallest circumference by:
[%]
ERROR: If this limb is really pear-shaped, the provided circumference in 1st line of the above table should be lower than in the 2nd line.
=> Max circumference is bigger than Min circumference by: {gtLargest}%

What socket type do you intend to make ?*

Without boa / soft socket : liner must compensate pear-shapeSocket with modular opening / boa system / soft socketI'm not sure - please contact me
Which liner type do you want:*

Not CompensatedHalf CompensatedFully CompensatedWaves

WARNING: For limbs with a circumference difference of 30% or more, a liner without waves will be very difficult / impossible to don and dof.

If ordering a liner without waves for such a limb, we will not accept warranty claims based on donning & doffing being too hard.
I have taken due notice to the warning above and still want to proceed with a liner without waves
PRODUCT CODE
Product Code
Based on your above choices, your product code is: {productCode1143}
I have checked this product code confirm this is the product I intend to order

	Circumference [cm]
Min proximal circumference
Max distal circumference

6. Shipping & Validation
DELIVERY DATE
Current date*

DayMonthYear
Estimated delivery date for today's orders:

{minDefault455} - {maxDefault459}

*A re-computed date will be provided in the order confirmation e-mail

*If we have to put this request on hold waiting for inputs from you, every lost day will be added to our target shipping date.

*A production attempt can always fail, leadng to unforeseen delays. MotionTech doesn't guarantee leadtime, these dates are only indicative.

WHY THESE DATES ?

10 extra business days for Waves Liners included in the above {displayedLead383} days

Select an earlier / later shipping date ?*

I'm OK with default datesChoose a different date (against discount / extra charge)
Choose your shipping date*

DayMonthYear
Estimated delivery date for chosen shipping date:

{minDesired462} - {maxDesired464}

↳ Subsequent extra-charge: {extraCharge}
Estimated delivery date for chosen shipping date:

{minDesired462} - {maxDesired464}

↳ Subsequent discount / extra-charge: {extraCharge} (no discount / extra-charge)
Estimated delivery date for chosen shipping date:

{minDesired462} - {maxDesired464}

↳ Subsequent discount: {extraCharge}
I have seen and accept this extra charge*

YesNo

How are discounts / extra charges determined ?

Current date - string
(used for calculating default shipping date)
UniShore Lead time + 10 Days
[weekdays]. = current lead time +10. Used to check if DS lead time is longer or shorter than lead time waves (useful for DSW liners)
Lead time + DualShore & Wave extra delays
[weekdays]. = current lead time / +10 (if wave) / = DS leadtime if DS
Displayed lead time
[weekdays] - This is equal to above number except if it's below 7 (=7 if current lead time below 7)
Default shipping date

DayMonthYear
Date type field
Default shipping date - string
.
Min default delivery date EU

DayMonthYear
Date type field
Min default delivery date EU - string
Max default delivery date EU

DayMonthYear
Date type field
Max default delivery date EU - string
Min default delivery date non-EU

DayMonthYear
Date type field
Min default delivery date non-EU - string
Max default delivery date non-EU

DayMonthYear
Date type field
Max default delivery date non-EU - string
Desired shipping date - string
Used to differentiate business days calculation based on which day is the desire shipping date
Min desired delivery date

DayMonthYear
Date type field
Min desired delivery date - string
Max desired delivery date

DayMonthYear
Date type field
Max desired delivery date - string
# Total days of difference with default lead time
Counts week ends, below property counts only business days
# Business days of difference with default lead time
/!\ Capped in negative (~-30 depending on week day) and in positive (~50 depending on week day)
# Days between requested shipping deadline and today
Used to calculate 10% fee when requested delivery date is in 5 days and actual lead time is between 7 and 10 days.
Is requested shipping deadline in 5 business days ?
=1 if yes, empty otherwise
Extra charge / discount - value
VALIDATE
Any final words ?
e.g. specific request / points of attention, remarks about patient's position during scan, etc.
Signature*

Clear
I agree to MotionTech's Terms & Conditions for the Your® Liner service.
Should be Empty:

Today's production leadtime for UniShore:	Today's production leadtime for DualShore:
{currentLead} business days	{currentLead1191} business days


Not compensated	Half compensated	Fully compensated	Waves
Donnable	Donnable	Donnable	Not necessary


Not compensated	Half compensated	Fully compensated	Waves
Donning can be difficult	Donnable	Donning can be difficult	Donnable


Not compensated	Half compensated	Fully compensated	Waves
Donning very difficult	Donning can be difficult	Donning very difficult	Recommended


Not compensated	Half compensated	Fully compensated	Waves
Donning impossible	Donning very difficult	Donning impossible	Recommended

1. Product Line Selection

AMPUTATION TYPE

LINER BODY TYPE

PEAR-SHAPED LIMB ?

PRODUCT CODE

2. Prescriber & Patient

PRESCRIBER

PATIENT ID

INDICATIONS

3. Hardness & Thickness

SILICONE TYPE

THICKNESS CONTROL

THICKNESS & HARDNESS CONTROL

THICKNESS CONTROL

THICKNESS & HARDNESS CONTROL

3D MODEL VALIDATION

4. Suspension & Style

SUSPENSION

TEXTILE COVER STYLE

SOCKET CUSTOMISATION

5. Shape Capture

LINER LENGTH

SOFT TISSUE MANAGEMENT

Scan & Measurement position

MEASUREMENTS

STUMP MARKINGS

UPLOADS

VIDEOS & PHOTOS

6. Shipping & Validation

DELIVERY DATE

VALIDATE

Today's production leadtime for Non-waves:	Today's production leadtime for Waves:
{currentLead} business days	{unishoreLead} business days

	Same as last liner	Different from last liner	NA / I don't know
Compressions
Thicknesses
Silicone type
Knee angle
Suspension
Aesthetic style

Position 1 - Sitting	Position 2 - Standing

Knee flexed at angle liner should have Tibial segment horizontal compared to ground Hands hold thigh to stabilise position	Knee flexed at angle liner should have Tibial segment vertical compared to ground Hands hold crutches or bar to stabilise position


A scan gives a static image. Use videos to give us a dynamic understanding.	Talk ! A few words can sometimes make everything crystal clear.	The above are only example. Show us what is relevant in your case !

	Yes	No
Thigh
Knee
Below-knee
Distal end

	Yes	No
Perineum / Trochanter level
Mid-stump
Distal end

	Distance to MPT	Loose perimeter	Tight perimeter
.
.
.
.
MPT
.
.
.
.
.
.

	Distance to MPT	Loose perimeter	Tight perimeter
.
.
.
.
MPT
.
.
.
.
.
.